Buying guide

What Size TV Mount Do You Need? A Fit Chart for 32 to 100 Inch TVs

Screen size is only one of three numbers that decide whether a mount fits. Use this chart to match your TV’s size, weight and VESA pattern to the right wall mount, ceiling mount or cart.

By TV Mounts Canada2 min read

Emmy DF400 full-motion TV wall mount

“Will it fit my TV?” is the question we answer most. The good news: you only need three numbers, and all three are on your TV’s spec sheet. The inch size on the box is just the first.

The three numbers that matter

  • Screen size: the diagonal, in inches. It tells you whether the mount’s brackets and wall plate suit the TV.
  • Weight without the stand: the one number you should never stretch. The mount’s maximum load is a limit, not a suggestion.
  • VESA pattern: the spacing of the four threaded holes on the back of the TV, in millimetres. The mount has to support your pattern or the screws will not line up.
ABVESA pattern = A × B, in millimetres
Measure between hole centres, across (A) and up (B), in millimetres. A TV with holes 400 mm apart both ways is VESA 400 × 400.

New to VESA? Our short explainer shows how to find your TV’s VESA pattern in a minute.

TV mount fit chart

TV size Slim: fixed or tilting Moves: full-motion or gas-spring
32–43 in NBC2-F fixed, NBC2-T tilting Emmy DF400, SP200, P4, F300 gas-spring
50–55 in NBC2-F, NBC2-T, NBC3-F fixed P6, F450 gas-spring (up to 50 in)
65 in NBC3-F fixed P6
70 in DF80-T tilting P6
75–90 in DF80-T tilting Use a cart (below)

And the limits behind the chart:

Mount Screen size Max load VESA range
NBC2-F 32–55 in 125 lb 100 × 100 to 400 × 400
NBC2-T 32–55 in 80 lb See product page
NBC3-F 40–65 in 150 lb 75 × 75 to 600 × 400
DF80-T 70–90 in 200 lb 200 × 200 to 800 × 600
Emmy DF400 32–47 in 60 lb 100 × 100 to 400 × 400
P4 32–47 in 60 lb 200 × 200 to 400 × 400
P6 40–70 in 100 lb 200 × 200 to 600 × 400
F300 30–40 in 11–22 lb 75 × 75 to 200 × 200
F450 40–50 in 17–35 lb See product page
Emmy DF400 full-motion TV wall mount
The Emmy DF400 full-motion mount fits 32 to 47 in TVs up to 60 lb.

Size is a guide. Weight is a rule.

Two 65 in TVs can differ by 20 lb or more, depending on their age and panel type. A mount that lists your screen size but not your weight does not fit. If your TV sits near the top of a mount’s weight limit, step up to the next model. The extra capacity costs little, and you will never think about it again.

Gas-spring mounts work differently. They list a weight range, because the spring has to balance the screen. A TV lighter than the range will drift up, and a heavier one will sink.

No wall, or a TV bigger than 70 in?

  • From the ceiling: the NBT560-15 hangs 32–57 in TVs up to 150 lb. It is a favourite for covered patios and open rooms.
  • On wheels: the AVA1500-60-1P cart takes TVs up to 75 in and 100 lb, and the AVA1800-70-1P up to 80 in and 200 lb.
  • The very big ones: the AVF1800-70-1P carries 55–88 in screens, and the motorized TW100 handles 60–100 in screens up to 300 lb.

Quick answers

Do all 65 inch TVs use the same mount?

No. Weight and VESA pattern vary between models, so check both.

Can I use a mount rated for bigger TVs on a smaller one?

Usually, as long as your VESA pattern is in the mount’s range. Check that the wall plate will not stick out past the edges of a small screen.

Where do I find my TV’s weight without the stand?

In the specifications section of the manual or on the manufacturer’s website. It is often listed as “weight without stand” or “panel weight”.

Want a shortcut? The mount finder matches your screen in a few questions, or you can send us your TV model and we will confirm the fit. Browse all TV wall mounts.

Shop this guide

Featured in this guide.

Shop all products
Keep reading

More guides from our team.

All guides

Not sure what fits? We'll help.

Try the mount finder for an instant match, or send us your screen model and wall type and we'll recommend a mount.